The Ford Barn

AZ_Nick · 11-19-2020, 10:05 PM

There was recently a Kwik Way LBM on eBay for $1750. It had the Ford fixtures but they were just shown in the pictures, not listed in the description so you need to know what to look for. I nearly bought it for parts but my better sense got ahold of me. In addition to the factory fixtures, I have a set of fixtures for A and T that will align off a false cam to double check everything before cutting. In theory, you could just set it up with the false cam and those fixtures are much easier to make. My fixtures are out on loan, will post pictures if I ever get them back!

BRENT in 10-uh-C · 11-20-2020, 10:42 AM

Quote:

Originally Posted by AZ_Nick

There was recently a Kwik Way LBM on eBay for $1750. It had the Ford fixtures but they were just shown in the pictures, not listed in the description so you need to know what to look for. I nearly bought it for parts but my better sense got ahold of me. In addition to the factory fixtures, I have a set of fixtures for A and T that will align off a false cam to double check everything before cutting. In theory, you could just set it up with the false cam and those fixtures are much easier to make. My fixtures are out on loan, will post pictures if I ever get them back!

So you are using an LBM to cut poured bearings in Model-T blocks & caps?

11-19-2020, 10:05 PM	#1
AZ_Nick Junior Member Join Date: Jan 2016 Posts: 18	Re: Kwik way lbm There was recently a Kwik Way LBM on eBay for $1750. It had the Ford fixtures but they were just shown in the pictures, not listed in the description so you need to know what to look for. I nearly bought it for parts but my better sense got ahold of me. In addition to the factory fixtures, I have a set of fixtures for A and T that will align off a false cam to double check everything before cutting. In theory, you could just set it up with the false cam and those fixtures are much easier to make. My fixtures are out on loan, will post pictures if I ever get them back!