|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-17-2020, 12:11 PM | #1 |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,835
|
*** Annual MAFCA Voting for Directors ***
Hello, everyone!
MAFCA has mailed out their annual Membership Renewal materials to all members, which also includes Voting for National Directors (for the 2021-22 term). I received mine today. When you get your renewal, please find the 2 postcard ballots included in there and VOTE FOR JIM CANNON (that's me!). Many people tell me that they do not vote is these elections because they don't know the people on the ballot. Well, you all know me from here. Also see the flier attached. Hopefully you recognize me also from reading The Restorer; I wrote the Technical Q&A column there for several years. So please send the ballots in before you forget or they get misplaced. Every household gets 2 ballots. You can vote them both for me! There are 5 open positions on the Board and 6 people running, but the ballot does not need to have 5 names marked. Vote for me and anyone else you know, that you think will do a good job. If you want, to save on postage, you can enclose both ballots with your membership renewal form and a check or credit card info. The people in the office that receive the mail throw the ballots in a box and then process the membership renewal. They are too busy to worry about who voted for whom. Please pass my name and my flier with your recommendation to all of your Model A friends and families. I need your support. As always, thank you very much. Feel free to contact me with any questions you may have about my priorities for MAFCA and where I think it needs to go in the future.
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" Last edited by Jim/GA; 08-17-2020 at 12:44 PM. |
08-17-2020, 02:26 PM | #2 |
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
Re: *** Annual MAFCA Voting for Directors ***
Although I have never met Jim I would say from his performance on Fordbarn he is a very good choice. He is here when we need him, where are the others? Good luck Jim !
Last edited by McMimmcs; 08-19-2020 at 04:12 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
08-17-2020, 03:04 PM | #3 |
Senior Member
Join Date: May 2010
Location: Concord CA
Posts: 649
|
Re: *** Annual MAFCA Voting for Directors ***
I have met Jim, at the Annual awards banquet in OK City a few years ago. Jim is a good guy and would recommend voting for him, That's what i am going to do. Good luck Jim!
|
08-17-2020, 05:05 PM | #4 |
Senior Member
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,557
|
Re: *** Annual MAFCA Voting for Directors ***
X2 Herb, he's a good choice and nice guy/
|
08-18-2020, 12:50 AM | #5 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,120
|
Re: *** Annual MAFCA Voting for Directors ***
I received the ballots and renewal card today. I will be sending them in shortly— with Jim’s name checked.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
08-18-2020, 06:26 AM | #6 |
Senior Member
Join Date: Jul 2010
Location: Auckland, New Zealand
Posts: 516
|
Re: *** Annual MAFCA Voting for Directors ***
Sponsored Links (Register now to hide all advertisements)
Always ready to chat and pass on his knowledge, he is a top guy and gets my vote and Diane's. SAJ in NZ |
08-19-2020, 03:55 PM | #7 |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,835
|
Re: *** Annual MAFCA Voting for Directors ***
Thank you, everyone, for the kind words.
Please tell your friends! .
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" |
08-19-2020, 08:28 PM | #8 |
Senior Member
|
Re: *** Annual MAFCA Voting for Directors ***
Already did Jim x 2 and very happy to have.
__________________
Mark Maron Ill., Region MARC & MAFCA MARC JSC Member MAFFI Trustee National Facebook Admin. https://www.facebook.com/groups/MARC.group/ A7191-Sport Coupe 29 Roadster 29-Town Sedan 29-Original Special Coupe |
08-19-2020, 08:33 PM | #9 |
Member
Join Date: Aug 2017
Location: Williston, Florida
Posts: 82
|
Re: *** Annual MAFCA Voting for Directors ***
Jim you have my vote. Getting ready to send it in with renewal.
|
09-26-2020, 12:14 PM | #10 |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,835
|
Re: *** Annual MAFCA Voting for Directors ***
I am kicking this to the top as a reminder to all to please mail your ballots (both of them) back to MAFCA, if you have not done so already. We only have a few weeks left to get them back.
You may not know all of the candidates listed, but you know me from here. So at least vote for me and return your ballots. As always, feel free to contact me directly with any questions or input you may have to share with me. Thanks! .
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" |
09-26-2020, 01:42 PM | #11 |
Senior Member
Join Date: May 2016
Location: Scottsdale, Arizona
Posts: 619
|
Re: *** Annual MAFCA Voting for Directors ***
Good Morning Jim...You have our two votes...always have, always will...Ernie in Arizona
|
09-26-2020, 01:52 PM | #12 |
Senior Member
|
Re: *** Annual MAFCA Voting for Directors ***
Jim has two votes from my family. Straight shooter and a good guy. He will serve the membership well. Go Jim Go!!!!
|
09-26-2020, 02:48 PM | #13 |
BANNED
Join Date: Feb 2013
Location: Coatesville, Pa
Posts: 719
|
Re: *** Annual MAFCA Voting for Directors ***
I'm not a member of MAFCA so I can't vote but if I was I would vote for Jim.
I am a MARC member. |
09-26-2020, 07:51 PM | #14 |
Senior Member
Join Date: May 2010
Posts: 2,792
|
Re: *** Annual MAFCA Voting for Directors ***
Hey no politics
Just joking Jim is very knowledgable on Model A's a good guy! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|