The Ford Barn

1947 ford · 07-30-2020, 07:10 PM

I have a question for the flathead gurue's , I have a 8ba motor with made in Canada on the heads , has aluminum intake 2 bbl. with 4 bolts, CC 9425 on the manifold, pulled 1 head, 4 inch stroke bored 3.250 with the pistons marked .040 , the motor turns over freely , has been converted to 12 volt coil and alternator . Has 3 speed trans attached , column shift . Valves all look good and marked ford script , see no visable cracks . What is this and how many cubic inches, and value , was going to use in my 40 ford but changed directions.

07-30-2020, 07:10 PM	#1
1947 ford Senior Member Join Date: May 2010 Posts: 120	8 ba I have a question for the flathead gurue's , I have a 8ba motor with made in Canada on the heads , has aluminum intake 2 bbl. with 4 bolts, CC 9425 on the manifold, pulled 1 head, 4 inch stroke bored 3.250 with the pistons marked .040 , the motor turns over freely , has been converted to 12 volt coil and alternator . Has 3 speed trans attached , column shift . Valves all look good and marked ford script , see no visable cracks . What is this and how many cubic inches, and value , was going to use in my 40 ford but changed directions.