1949 head light switch removal

[mtflat]

51/52 have a button. 48-50 have a small slot on the bottom side - push a small screw driver into it to release the shaft.

[makemc]

if you look up at the bottom of the light switch
you will see a small slot near the front of the switch
put a small screwdriver in the slot and twrist slightly
and turn the knob a little to the leaf and pull, it
should come out of the switch with the shaft attached

[Redhorse1947]

Here is a picture of the switch (shown upside down) and the small brass "tab" that must be depressed. Once the "tab" is depressed the knob can be turned about 1/4 turn to the left and released.