Model b motor

[Licensed to kill]

Originally Posted by Jim Brierley

The sound is very likely caused by loose flywheel bolts, not uncommon on 4 cylinder engines.

How would one go about checking that?. I don't recall, an inspection cover on the bottom of the bell housing. Would hate to have to pull the engine just to check for the possibility of loose bolts.

[40 Deluxe]

Originally Posted by Licensed to kill

How would one go about checking that?. I don't recall, an inspection cover on the bottom of the bell housing. Would hate to have to pull the engine just to check for the possibility of loose bolts.

Just pull the starter and wiggle the flywheel!