29 Tudor crank pulley question

[Bob C]

It is possible the nut is bottomed out on the crank snout, you may
need to add a washer. The ID of the washer need to be a little bigger than the OD of the snout.

[fred93]

Originally Posted by Bob C

It is possible the nut is bottomed out on the crank snout, you may
need to add a washer. The ID of the washer need to be a little bigger than the OD of the snout.

*******************************************

Thanks for your reply.

I was thinking the same thing (a washer) but I figured that I better ask before I actually do it.

BTW I do have the special wrench for that bolt.