Suggestions for rattle can base color 34 woodgraining?

[Digger]

Going to use ACE red primer as the base coat, and the ‘34 Grain It Technologies walnut burl plate, will send photo when done

[big job]

Originally Posted by Digger

Going to use ACE red primer as the base coat, and the ‘34 Grain It Technologies walnut burl plate, will send photo when done

Thats what I'm talking about ....

[Karl]

Originally Posted by Digger

Going to use ACE red primer as the base coat, and the ‘34 Grain It Technologies walnut burl plate, will send photo when done

I used the Grain-It Burl plate . Because they can't ship spray cans internationally I matched the base coat off their colour charts and got the dash sprayed at a paint shop After I had done it all I realized I had not done the glove box hinge. I used red oxide primer as a base coat and looks exactly the same as the matched base coat at a fraction of the cost -Karl