The Ford Barn

Bob C · 06-04-2020, 10:17 AM

The trans with the top shifter looks like a pickup heavy duty 3-speed, the one that says teeth broken is the one you need, the last one is a 1949-early 51 Mercury OD.

V8COOPMAN · 06-04-2020, 02:33 PM

I'd surely like to know what the case on this side-shift transmission came out of with that cast bolt flange on the rear. Corsair-Kid....can you turn that trans upside-down and look for a ??-7006 number cast-in at bottom rear of case? They may be covered by caked grease. There should be two prefix numbers before a -7006. Can you see TWO prefix numbers like that? Can you read a serial number STAMPED into that flat, rectangular pad at TOP, Front of trans case? DD

06-04-2020, 10:17 AM	#1
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 9,359	Re: Transmisson Gear Set Interchange The trans with the top shifter looks like a pickup heavy duty 3-speed, the one that says teeth broken is the one you need, the last one is a 1949-early 51 Mercury OD.

06-04-2020, 02:33 PM	#2
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,184	Re: Transmisson Gear Set Interchange I'd surely like to know what the case on this side-shift transmission came out of with that cast bolt flange on the rear. Corsair-Kid....can you turn that trans upside-down and look for a ??-7006 number cast-in at bottom rear of case? They may be covered by caked grease. There should be two prefix numbers before a -7006. Can you see TWO prefix numbers like that? Can you read a serial number STAMPED into that flat, rectangular pad at TOP, Front of trans case? DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*