Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-24-2020, 06:48 AM   #1
shew01
Senior Member
 
shew01's Avatar
 
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 2,091
Default Re: Engine oil level question

Quote:
Originally Posted by 28tudorsedan View Post
Could possibly have some sludge build up in there hence the reason at 4 quarts your already over the mark I did my oil change last week at 4.5q I was right on the full line.

I never thought about sludge potentially taking up space in the oil pan and altering the amount of oil required for a refill. My car’s engine was rebuilt before I purchased it; so, I’ve never had the pan off.

Can sludge really build up that much?


Sent from my iPhone using Tapatalk
shew01 is offline   Reply With Quote
Old 05-25-2020, 08:26 AM   #2
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Engine oil level question

Quote:
Originally Posted by shew01 View Post
I never thought about sludge potentially taking up space in the oil pan and altering the amount of oil required for a refill. My carÂ’s engine was rebuilt before I purchased it; so, IÂ’ve never had the pan off.

Can sludge really build up that much?


Sent from my iPhone using Tapatalk
Like others above indicate, only if run for a very long time with non detergent oil.



After a 50 year nap, my A had inches of sludge built up in the bottom of the pan, had buildup in the Valve Galley, and had actually blocked the oil pump and oil pump screen. Luckily I caught it before it caused damage to the motor. It is the nastiest black/brown goo like molasses substance ever. Once on your hands or clothes is very difficult to clean off. Since multi-weight oil keeps contamination floating around in the oil, this is the reason some like to add the aftermarket oil filter kit.



Other contributors to sludge.
In the history of oil, manufacturers added Paraffin to motor oil to quiet valves and worn motors. Paraffin is wax. I believe this was in the 50s/60s
Motor coolant temps need to reach 160 degrees or more to allow the oil to reach temps that burn off condensation and other contaminants. Usually for more than 20 minutes. Some of us like to install a thermostat for this reason, and lubrication works better at higher temps, and the thermostat allows the temp to reach operating much quicker. Most wear happens at cold/lower motor temps.



Since your motor was rebuilt, your motor should be clean, especially since after rebuild it most likely has been using detergent oil.
30 Closed Cab PU is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-25-2020, 08:37 AM   #3
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Engine oil level question

deleted double post

Last edited by 30 Closed Cab PU; 05-25-2020 at 02:20 PM. Reason: double post
30 Closed Cab PU is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:29 PM.