|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
Thread Tools | Display Modes |
![]() |
#6 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 574
|
![]() Sponsored Links (Register now to hide all advertisements)
"I set up a testing area as described in the book—25 feet from the headlights, horizontal line 37 inches from the floor and headlight centering marks 15 inches from the center." Its obvious which light is the original incandescent and LogoLight. The original light is on high beam in picture 1 Picture 2 is the LogoLight. He says the headlight needs to be adjusted down slightly. Picture 3 is obvious. I never wanted to or felt safe driving my A at night until I installed the LED lights. I recently made a 100 mile trip at night from the North Rim of the Grand Canyon to Kanab, UT with no concerns. It was mostly black black night and a few small towns. I had no problem with yellow or orange cones or road signs. Last edited by GPierce; 05-18-2020 at 10:42 AM. |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|