|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-10-2020, 05:13 PM | #1 |
Senior Member
Join Date: May 2010
Location: Mesquite, NV / Gurnee, IL
Posts: 298
|
Two Piece Oil Pans? When were they made?
I have searched but cannot find any reference to the 2 piece oil pan. I am looking for a 2 piece oil pan, one that will let me remove the flywheel without dropping the oil pan. What year car or truck were these installed new?
|
01-10-2020, 05:36 PM | #2 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Two Piece Oil Pans? When were they made?
Don't ever remember seeing one but it wouldn't take much to strategically cut the bell housing portion off and create a bolt together joint to allow it to be removed.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
Sponsored Links (Register now to hide all advertisements) |
|
01-10-2020, 05:46 PM | #3 |
Member
Join Date: Feb 2011
Posts: 58
|
Re: Two Piece Oil Pans? When were they made?
I have no date when these were released but I believe it was for the 59 AB trucks with the larger clutch. I have a few on the shelf and can snap some photos if you want to see what they look like.
|
01-10-2020, 06:31 PM | #4 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,861
|
Re: Two Piece Oil Pans? When were they made?
I agree with Stenny; jailbar trucks had them
__________________
Unfortunately, two half wits don't make a whole wit! |
01-10-2020, 06:42 PM | #5 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,069
|
Re: Two Piece Oil Pans? When were they made?
Here's one 2 piece.
https://picclick.com/1946-1948-Ford-...718261268.html |
01-10-2020, 06:51 PM | #6 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,138
|
Re: Two Piece Oil Pans? When were they made?
Sponsored Links (Register now to hide all advertisements)
Last edited by V8COOPMAN; 01-10-2020 at 07:22 PM. |
01-10-2020, 07:08 PM | #7 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,861
|
Re: Two Piece Oil Pans? When were they made?
And there is two versions ; one has the regular big drain plug, the other has the big clean out removeable plate.
__________________
Unfortunately, two half wits don't make a whole wit! |
01-10-2020, 07:26 PM | #8 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,138
|
Re: Two Piece Oil Pans? When were they made?
Quote:
Brian....Actually, there are at least three types. This one is supposedly Canadian heavy duty truck application. DD |
|
01-10-2020, 08:52 PM | #9 |
Senior Member
Join Date: May 2010
Location: Mass.
Posts: 379
|
Re: Two Piece Oil Pans? When were they made?
I have known about them and using them for years. They certainly do make life a lot easier when doing a clutch and flywheel job.
|
01-10-2020, 10:05 PM | #10 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,861
|
Re: Two Piece Oil Pans? When were they made?
Coop, Thanks for the photos, that yellow one shows the big clean out removable plate I mentioned, what is the third type?
__________________
Unfortunately, two half wits don't make a whole wit! |
01-10-2020, 10:44 PM | #11 |
Senior Member
Join Date: May 2010
Location: Mesquite, NV / Gurnee, IL
Posts: 298
|
Re: Two Piece Oil Pans? When were they made?
What years were they made? Thanks everyone for the pictures and info.
|
01-10-2020, 10:54 PM | #12 |
Senior Member
Join Date: May 2010
Posts: 258
|
Re: Two Piece Oil Pans? When were they made?
Ford-ers;
Note the difference in the road draft arrangement -- a bolt on draft tube extending aside to rear of the engine rather than the slotted tri shape can --more Canadian &/or Export than USA -just My opinion More neat Ford stuff & practical! Love it Gene Tulsa Re picture in post # 8 Last edited by G32; 01-10-2020 at 10:57 PM. Reason: Mis quote |
01-10-2020, 11:25 PM | #13 |
Senior Member
Join Date: May 2010
Location: Lee's Summit, Mo
Posts: 339
|
Re: Two Piece Oil Pans? When were they made?
The yellow pan is Canadian military. 1942-48 Part#6675. I have one of the military two piece pans and a regular two piece pan. Both oil bosses on them do not have a place for a oil return line. They do have one in the side of the pan. I believe that would make them 1942 and earlier.
|
01-11-2020, 02:06 AM | #14 |
Senior Member
Join Date: May 2010
Posts: 2,539
|
Re: Two Piece Oil Pans? When were they made?
Hi all; I restored a low miles '48 Canadian M-37 1/2 ton pickup and it came with a 2 piece pan. All the rest I have seen were on big trucks/COE's too. Newc
|
01-11-2020, 06:13 AM | #15 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,284
|
Re: Two Piece Oil Pans? When were they made?
If anyone has just the pan for sale, I’d be interested. I have the back piece.
|
01-11-2020, 07:33 AM | #16 |
Senior Member
Join Date: Aug 2018
Location: Ottawa, ON
Posts: 930
|
Re: Two Piece Oil Pans? When were they made?
Lol. The yellow one is mine. It came off a C59A (or C69/AT according to rebuild tag). Mine was used as an industrial engine out in western Canada. It was disaassembled when I purchased it, and the seller provided me with two remote oil filters. There is no oil return line in the pan that I can recall.
|
01-11-2020, 10:20 AM | #17 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,138
|
Re: Two Piece Oil Pans? When were they made?
Quote:
Brian.... 1st with a normal, small drain plug. 2nd with large, steel ROUND clean-out hole. 3rd with this OBLONG style, steel clean-out-shaped plate cover like YELLOW above. DD |
|
01-11-2020, 04:45 PM | #18 |
Senior Member
Join Date: May 2010
Location: ontario,Canada
Posts: 457
|
Re: Two Piece Oil Pans? When were they made?
Does this mean a person doesn't have to remove engine to replace clutch plate ?
|
01-11-2020, 04:54 PM | #19 |
Senior Member
Join Date: Feb 2011
Posts: 794
|
Re: Two Piece Oil Pans? When were they made?
|
01-11-2020, 11:49 PM | #20 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 942
|
Re: Two Piece Oil Pans? When were they made?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|