The Ford Barn

40 Ford rodder · 04-13-2019, 05:54 PM

Veh has solid Rockers,Inner Rockers,Torque Boxes,Rails,Rear Trunk Floor. Great gasser candidate. I'm getting ready to weld floors in. I can add subrails if interested for additional cost. I have a good frnt bumper for core and brkts.
The block in veh now is a late model 5.0 block only with heads. I have a 289 short block bored 40 over with a stock 289 4 Brl intake and 4 brl Ford carb, 3 spd trans. 8 in rear.
For additional 500.00 I have a 9 in with the motorsport big brng disc kit.
For additional cost I have a big block 352 that runs.
I have clean Mich title in my name.

3500.00 OBO

40 Ford rodder · 04-23-2019, 07:13 PM

btt

40 Ford rodder · 05-25-2019, 10:29 PM

BTT
Veh has solid Rockers,Inner Rockers,Torque Boxes,Rails,Rear Trunk Floor. Great gasser candidate. I'm getting ready to weld floors in. I can add subrails if interested for additional cost. I have a good frnt bumper for core and brkts.
The block in veh now is a late model 5.0 block only with heads. I have a 289 short block bored 40 over with a stock 289 4 Brl intake and 4 brl Ford carb, 3 spd trans. 8 in rear.
For additional 500.00 I have a 9 in with the motorsport big brng disc kit.
For additional cost I have a big block 352 that runs.
I have clean Mich title in my name.

40 Ford rodder · 06-17-2019, 04:27 PM

BTT
Veh has solid Rockers,Inner Rockers,Torque Boxes,Rails,Rear Trunk Floor. Great gasser candidate. I'm getting ready to weld floors in. I can add subrails if interested for additional cost. I have a good frnt bumper for core and brkts.
The block in veh now is a late model 5.0 block only with heads. I have a 289 short block bored 40 over with a stock 289 4 Brl intake and 4 brl Ford carb, 3 spd trans. 8 in rear.
For additional 500.00 I have a 9 in with the motorsport big brng disc kit.
For additional cost I have a big block 352 that runs.
I have clean Mich title in my name.

40 Ford rodder · 10-26-2019, 02:40 PM

Btt

40 Ford rodder · 01-01-2020, 12:30 PM

Sponsored Links (Register now to hide all advertisements)

btt

40 Ford rodder · 02-08-2020, 05:11 PM

BTT.
Veh has solid Rockers,Inner Rockers,Torque Boxes,Rails,Rear Trunk Floor. Great gasser candidate. I'm getting ready to weld floors in. I can add subrails if interested for additional cost. I have a good frnt bumper for core and brkts.
The block in veh now is a late model 5.0 block only with heads. I have a 289 short block bored 40 over with a stock 289 4 Brl intake and 4 brl Ford carb, 3 spd trans. 8 in rear.
For additional 500.00 I have a 9 in with the motorsport big brng disc kit.
For additional cost I have a big block 352 that runs.
I have clean Mich title in my name.

04-23-2019, 07:13 PM	#2
40 Ford rodder Senior Member Join Date: Apr 2014 Location: Taylor,Mi. Posts: 309	Re: 1962 ford fairlane 500 2dr fin car btt

05-25-2019, 10:29 PM	#3
40 Ford rodder Senior Member Join Date: Apr 2014 Location: Taylor,Mi. Posts: 309	Re: 1962 ford fairlane 500 2dr fin car BTT Veh has solid Rockers,Inner Rockers,Torque Boxes,Rails,Rear Trunk Floor. Great gasser candidate. I'm getting ready to weld floors in. I can add subrails if interested for additional cost. I have a good frnt bumper for core and brkts. The block in veh now is a late model 5.0 block only with heads. I have a 289 short block bored 40 over with a stock 289 4 Brl intake and 4 brl Ford carb, 3 spd trans. 8 in rear. For additional 500.00 I have a 9 in with the motorsport big brng disc kit. For additional cost I have a big block 352 that runs. I have clean Mich title in my name.

06-17-2019, 04:27 PM	#4
40 Ford rodder Senior Member Join Date: Apr 2014 Location: Taylor,Mi. Posts: 309	Re: 1962 ford fairlane 500 2dr fin car BTT Veh has solid Rockers,Inner Rockers,Torque Boxes,Rails,Rear Trunk Floor. Great gasser candidate. I'm getting ready to weld floors in. I can add subrails if interested for additional cost. I have a good frnt bumper for core and brkts. The block in veh now is a late model 5.0 block only with heads. I have a 289 short block bored 40 over with a stock 289 4 Brl intake and 4 brl Ford carb, 3 spd trans. 8 in rear. For additional 500.00 I have a 9 in with the motorsport big brng disc kit. For additional cost I have a big block 352 that runs. I have clean Mich title in my name.

10-26-2019, 02:40 PM	#5
40 Ford rodder Senior Member Join Date: Apr 2014 Location: Taylor,Mi. Posts: 309	Re: 1962 ford fairlane 500 2dr fin car Btt

01-01-2020, 12:30 PM	#6
40 Ford rodder Senior Member Join Date: Apr 2014 Location: Taylor,Mi. Posts: 309	Re: 1962 ford fairlane 500 2dr fin car Sponsored Links (Register now to hide all advertisements) btt

02-08-2020, 05:11 PM	#7
40 Ford rodder Senior Member Join Date: Apr 2014 Location: Taylor,Mi. Posts: 309	Re: 1962 ford fairlane 500 2dr fin car BTT. Veh has solid Rockers,Inner Rockers,Torque Boxes,Rails,Rear Trunk Floor. Great gasser candidate. I'm getting ready to weld floors in. I can add subrails if interested for additional cost. I have a good frnt bumper for core and brkts. The block in veh now is a late model 5.0 block only with heads. I have a 289 short block bored 40 over with a stock 289 4 Brl intake and 4 brl Ford carb, 3 spd trans. 8 in rear. For additional 500.00 I have a 9 in with the motorsport big brng disc kit. For additional cost I have a big block 352 that runs. I have clean Mich title in my name.