The Ford Barn

Franchise_24 · 08-03-2019, 09:38 PM

Thanks everyone, will give it a try tomorrow.

1crosscut · 08-03-2019, 09:49 PM

Yes tapping on the nut works well. I take the nut off, reverse it and thread it back on 90% of the way. Be careful not to strike it too hard and off center as you can bend the shaft at the threaded area.

08-03-2019, 09:38 PM	#1
Franchise_24 Senior Member Join Date: May 2010 Location: Lexington, Ohio Posts: 783	Re: Removing fan blade Thanks everyone, will give it a try tomorrow. __________________ 1929 Model A Ford Coupe

08-03-2019, 09:49 PM	#2
1crosscut Senior Member Join Date: Feb 2011 Location: Lincoln, Nebraska Posts: 2,011	Re: Removing fan blade Yes tapping on the nut works well. I take the nut off, reverse it and thread it back on 90% of the way. Be careful not to strike it too hard and off center as you can bend the shaft at the threaded area. __________________ Dave / Lincoln Nebraska