|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-05-2018, 02:18 PM | #21 |
Senior Member
Join Date: Jun 2010
Location: Highland, CA
Posts: 207
|
Re: Model A Timing Advance System
Here's what I use:
Stock distributor w/modern style cap and custom MSD wires. Pertronix ignitor (acting only as trigger for the MSD). Points plate locked out a 28 deg total advance. The MSD does the rest. If I want to try a different curve I simply plug in the laptop and change the curve. Since this is such a low compression engine I'm running an .080 plug gap and have run extremely rich/lean without a misfire. The attached curve may or may not be the one I finally settled on, I don't remember, but it's similar. |
11-05-2018, 04:23 PM | #22 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,564
|
Re: Model A Timing Advance System
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|