|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
![]()
what a model b engine worth the guy said it is all most complete but it needs a sleeve thanks
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,192
|
![]()
depends on why it needs a sleeve---and is the crankshaft counterweighted
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
![]()
waiting for him to get back to me
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
![]()
he said 600.00
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,565
|
![]()
Do the cracks come for free?? I'd consider paying that much ONLY IF it had been magnafluxed and proved good and it has a counterweighted crankshaft.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,192
|
![]() Sponsored Links (Register now to hide all advertisements)
cracked blocks are usually cheaper than 600 |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
![]()
im trying to find out why it needs a sleeve
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,852
|
![]()
cracked blocks are usually cheaper than 600
walk away. |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,846
|
![]()
I like to use old V8’s for boat anchors, but this one could work. Enjoy.
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
![]()
got some pics today from him
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: May 2010
Location: Eastern CT
Posts: 2,732
|
![]()
No counter weighted crank, and a big poorly repaired crack from valve to cylinder. If it were mine, I would give it to WHN to use as a boat anchor.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
![]()
cost to much to fix and not worth what he wants for it
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,192
|
![]()
that blob of weld makes it hard to fix, and could have caused more cracks, it has to be priced at the value of the other parts
|
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,545
|
![]()
I have a limit of $125 for a long block where the condition / serviceability is unknown. Both of my Model A's have "B" Engines, and I went through 4 of them to get 2 usable ones. I would not recommend buying a cracked Model "B" Engine.
__________________
Bob Bidonde |
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
![]()
I passed on it didn't like how they welded it
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|