|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,471
|
![]()
Go to Napa and get an Echlin IH-200. We have used well over a 1,000
for over 10 years and never heard of a failure. G.M.
__________________
www.fordcollector.com |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: uk
Posts: 367
|
![]() |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 | |
Senior Member
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,471
|
![]() Quote:
You use the mounting bracket that comes with the condenser and mount it with the screw on the passenger side that holds the coil on to hold it on and ground the condenser. Put a screw through the hole in the coil sticking out the passenger side, nut and lock washer, the lead end on the condenser wire and another lock washer and nut. Now you condenser problem is over. G.M.
__________________
www.fordcollector.com |
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|