Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-21-2018, 02:47 PM   #1
kd4lok
Member
 
kd4lok's Avatar
 
Join Date: Sep 2013
Location: Central FL
Posts: 72
Default Re: Mitchell Over Drive 26% or 36%

Quote:
Originally Posted by Purdy Swoft View Post
If a completely stock model A won't cruise at 50 MPH , something is wrong .
My Coupe may do 50 mph but I don’t wish to push it that hard. Before doing much distance driving, I will need to do something to reduce the rpm. Perhaps it’s mostly a mental thing.
__________________
Bob
kd4lok is offline   Reply With Quote
Old 06-21-2018, 04:03 PM   #2
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: Mitchell Over Drive 26% or 36%

Quote:
Originally Posted by kd4lok View Post
My Coupe may do 50 mph but I don’t wish to push it that hard. Before doing much distance driving, I will need to do something to reduce the rpm. Perhaps it’s mostly a mental thing.

I would be more concerned about lugging the engine . Lugging the engine with low RPMs in high gear has ruined the bearings in lots of model A engines . As strange as it may seem, sometimes more damage can be done trying to take it easy on the engine than running at full throttle . Good luck and no harm meant .
Purdy Swoft is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:01 AM.