05-28-2018, 11:01 AM | #1 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 522
|
Fuel Filter
I have had a problem with fine particles of rust passing thru the Tank standup screen and the screen in the sediment bulb and into the carb.
Most of the fine junk stays in the bottom of the sediment bulb. I though all of it did until I started have engine stalling problems. Removing the Carb I found the same small particles in the float bowl and the GAV valve bore. I found this filter at NAPA; part-number 3039. It fits in the recess at the top of the glass bulb and is held in place with the bulb gasket. I removed the sediment bulb screen. All the fuel is now filtered by the paper filter. I bought three of them and carry one with me in the truck. Snyders and Bratton's also carry this filter and theirs includes the gasket. https://www.napaonline.com/en/p/FIL3039 Last edited by GPierce; 05-28-2018 at 12:17 PM. |
05-28-2018, 11:43 AM | #2 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,883
|
Re: Fuel Filter
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
05-28-2018, 11:51 AM | #3 |
Senior Member
Join Date: Feb 2017
Location: Northern Idaho
Posts: 282
|
Re: Fuel Filter
|
05-28-2018, 12:13 PM | #4 |
Senior Member
Join Date: May 2010
Location: Tacoma, WA
Posts: 1,027
|
Re: Fuel Filter
Been using them for many years. Love em.
|
05-28-2018, 12:15 PM | #5 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 522
|
Re: Fuel Filter
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|