|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
Thread Tools | Display Modes |
![]() |
#4 |
Senior Member
Join Date: Feb 2017
Location: Northern Idaho
Posts: 282
|
![]()
While you are in there doing what Standing Elk suggested, try grounding out the wire from the horn switch directly to a good ground point on the chassis. This might help determine if the problem is in the horn itself or in the horn button/wiring.
|
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|