The Ford Barn

Jwawhite · 04-30-2018, 11:39 AM

I'm getting the car out today will take some photos of the tips I have. The tips were bolted to the bumper, one was narrowed, sliced widthwise? rewelded to fit from body to bumper, clearance issue. Some of the work on this car was/is interesting, isn't that what some say about art?, they don't like?
K, yes, car was a bit slopped? together. 302/AOD/8" Spicer. Tubed Headers changed out for cast ones. I've tried to find block #'s w/o success, but if, IF, the F.I. intake manifold came with this block, it's either a 94 or 95 Mustang HO 5 liter motor. The number off the computer reads 94 with a standard trans.

04-30-2018, 11:39 AM	#18
Jwawhite Senior Member Join Date: Nov 2016 Location: Now on the Land of Sun City West, AZ Posts: 516	Re: Looking to install exhaust through bumper on 56 fairlane I'm getting the car out today will take some photos of the tips I have. The tips were bolted to the bumper, one was narrowed, sliced widthwise? rewelded to fit from body to bumper, clearance issue. Some of the work on this car was/is interesting, isn't that what some say about art?, they don't like? K, yes, car was a bit slopped? together. 302/AOD/8" Spicer. Tubed Headers changed out for cast ones. I've tried to find block #'s w/o success, but if, IF, the F.I. intake manifold came with this block, it's either a 94 or 95 Mustang HO 5 liter motor. The number off the computer reads 94 with a standard trans.