The Ford Barn

35fordtn · 02-14-2011, 10:50 PM

I am in a severe need of 1933-early 35 Ford original aluminum heads. Must have Ford script and 40- prefix part#. NEED NOS or near mint condition please call michael @ 615-293-9985 or email @ [email protected]

JM 35 Sedan · 02-16-2011, 12:25 AM

You can buy reproduction aluminum heads that are exactly like originals. Not cheap though. The last time I checked they were $1500 per set but very very nice.

Terry,OH · 02-16-2011, 07:28 AM

The Ford script was not on the heads proir to about Aug. 1934 so most of the 33-34 heads do not have script.

hotrodjeep · 02-16-2011, 07:38 AM

I've got a drivers side head but have yet to find a p/n just the Ford script:

PM for price and details.

Jeff

David J · 02-16-2011, 02:10 PM

There's quite a few variants of 33-34 heads and like Terry stated above MOST of the gennie ones don't have ford on them . Some have no markings other than the usual stamped stuff top front . The later ones also have smaller spark plug openings . There was a thread about the HT markings on later ones and Don Rodgers had the Good info on that and also touched on the different suppliers of them . He may have further info on these heads .I personally just buy the ones with recessed part # and no Ford script and the un-marked ones - both these types have the proper large plug opening and the first type shows up consistently on gennie 33 motors . The LH posted above looks like a gennie late 34 to me . Hope this helps as these can get expensive if nice and a guy hates to buy the wrong ones .

David J

EAV8 · 02-16-2011, 02:29 PM

Sponsored Links (Register now to hide all advertisements)

I have one (1) single alumium head that looks to be NOS. Still has the metal plugs inserted where the spark plugs go. Has a part # 52-6050-B and a "FORD" script along with the #HT8. A #2 with-in a circle and the #3 just below. I think this might be for the 1937-41, 60 HP but I'm not sure. I will sell for $100. plus freight. Gary Clonts, Oklahoma City, OK 73142 405-620-2655 [email protected]

35fordtn · 02-19-2011, 05:24 PM

The heads i need are for a EARLY 1935 Ford that used late 34 heads They need to be Ford script with large plug opening and a 40- part#

bedfordboys24523 · 02-20-2011, 08:47 AM

I am in need also, I came across a pair on ebay last night, they look great guy claims that they are NOS. If I recall it had a buy it now for a grand. To much for my pockets right now but you might want to check.

02-14-2011, 10:50 PM	#1
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,334	1933-35 Original heads needed City: Nashville State: TN I am in a severe need of 1933-early 35 Ford original aluminum heads. Must have Ford script and 40- prefix part#. NEED NOS or near mint condition please call michael @ 615-293-9985 or email @ [email protected]

02-16-2011, 02:10 PM	#5
David J Senior Member Join Date: Jun 2010 Location: St Croix Falls WI Posts: 2,080	Re: 1933-35 Original heads needed There's quite a few variants of 33-34 heads and like *Terry* stated above MOST of the gennie ones don't have ford on them . Some have no markings other than the usual stamped stuff top front . The later ones also have smaller spark plug openings . There was a thread about the HT markings on later ones and *Don Rodgers* had the *Good info* on that and also touched on the different suppliers of them . He may have further info on these heads .I personally just buy the ones with recessed part # and no Ford script and the un-marked ones - both these types have the proper large plug opening and the first type shows up consistently on gennie 33 motors . The LH posted above looks like a gennie late 34 to me . Hope this helps as these can get expensive if nice and a guy hates to buy the wrong ones . David J

02-16-2011, 02:29 PM	#6
EAV8 Member Join Date: May 2010 Location: Oklahoma City, OK Posts: 62	Re: 1933-35 Original heads needed Sponsored Links (Register now to hide all advertisements) I have one (1) single alumium head that looks to be NOS. Still has the metal plugs inserted where the spark plugs go. Has a part # 52-6050-B and a "FORD" script along with the #HT8. A #2 with-in a circle and the #3 just below. I think this might be for the 1937-41, 60 HP but I'm not sure. I will sell for $100. plus freight. Gary Clonts, Oklahoma City, OK 73142 405-620-2655 [email protected]

02-19-2011, 05:24 PM	#7
35fordtn Senior Member Join Date: Aug 2010 Location: McMinnville, TN Posts: 2,334	Re: 1933-35 Original heads needed The heads i need are for a EARLY 1935 Ford that used late 34 heads They need to be Ford script with large plug opening and a 40- part#

02-20-2011, 08:47 AM	#8
bedfordboys24523 Member Join Date: Jan 2011 Posts: 34	Re: 1933-35 Original heads needed I am in need also, I came across a pair on ebay last night, they look great guy claims that they are NOS. If I recall it had a buy it now for a grand. To much for my pockets right now but you might want to check.

02-16-2011, 12:25 AM	#2
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,862	Re: 1933-35 Original heads needed You can buy reproduction aluminum heads that are exactly like originals. Not cheap though. The last time I checked they were $1500 per set but very very nice. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

02-16-2011, 07:28 AM	#3
Terry,OH Senior Member Join Date: May 2010 Posts: 4,803	Re: 1933-35 Original heads needed The Ford script was not on the heads proir to about Aug. 1934 so most of the 33-34 heads do not have script.