Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page Fabricating oil pickup?

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-23-2018, 10:46 PM   #1
Dad Was A Racer
Junior Member
 
Dad Was A Racer's Avatar
 
Join Date: Jan 2018
Location: Bryan, Texas
Posts: 11
Default Fabricating oil pickup?
Has anyone fabricated an oil pickup tube for their flathead from scratch? I have an 8BA with a center sump pan (been identified as a '53 pass car pan I believe) and the only pickup tube I can find is a truck sump for the pan with the pickup at the back. Before I cut up the one I have, I'm considering making my own from scratch. Maybe even stainless.

Any ideas or suggestions?
Dad Was A Racer is offline   Reply With Quote
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:14 AM.