Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-05-2018, 07:25 PM   #1
joe plumber
Senior Member
 
Join Date: May 2010
Posts: 820
Default Re: Adjusting Flathead V8 Lifters

[QUOTE=Ol' Ron;1574642]That's why we drill holes in the lifter bores so we don't have to use the damn things, When using a Hi Lift cam, just grind a little off the top of the lifter bore so you can get at the adjuster. A 400 jr is a bad idea unless you plan on racing. An isky 1007B would be a better choice.[/QUO
joe plumber is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:04 PM.