wire gages and rewinding motors - The Ford Barn

		The Ford Barn > General Discussion > Model A (1928-31)
wire gages and rewinding motors

Sponsored Links (Register now to hide all advertisements)

Prev

Previous Post

Next Post

Next

11-24-2017, 01:21 AM	#6
Mike V. Florida Senior Member Join Date: May 2010 Location: Florida between Sarasota and TampaSouth Florida Posts: 14,054	Re: wire gages and rewinding motors Sponsored Links (Register now to hide all advertisements) Information for the field coils of the horn: 6 Volt (1) The 2 field coils are wound in opposite directions. (2) Original field coil wire is 20 gauge. (3) a. 45 turns using coated wire. b. 6 to 7 turns per layer, not perfect is OK (4) After completing, spray with varnish or epoxy insulating enamel. 12 Volt (1) Same as above. (2) Use 24 gauge coated wire. (3) a. 100 turns b. 6-7 turns per layer, not perfect is OK (4) Same as above. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 05:15 AM.