09-18-2017, 10:54 AM
|
#9 |
|
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,818
|
Re: Split intake
That crack is the result of heat from the exhaust crossover. The aluminum was on the verge of melting. Excess heat is caused by retarded timing or a lean fuel mixture. If you have the original vacuum only Load-O-Matic distributor, the diaphragm may be blown. If the carb is not original, the Load-O-Matic will not give the right advance.
|
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 09:13 PM.