Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-03-2017, 04:46 PM   #1
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,192
Default Re: F1 steering or rebuild two tooth.

I have the F-100 box and love it.
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club

Last edited by CarlG; 09-03-2017 at 06:57 PM.
CarlG is offline   Reply With Quote
Old 09-03-2017, 05:05 PM   #2
MAG
Senior Member
 
MAG's Avatar
 
Join Date: May 2010
Location: Austin, Texas
Posts: 926
Default Re: F1 steering or rebuild two tooth.

I have both F100 Steering Box's and 2 Tooth Boxes installed and can really tell little difference in them.
The 2 Tooth Boxes are completely rebuilt with all new parts ( and have zero play at center) along with a Short Pitman Arm and Teflon bushings in the steering linkage. New balls on the steering arms.
The F100 box is slightly easier to turn due to ratio but is hardly noticeable.
You might be able to locate a early 2 Tooth Box with a splined shaft and not have to replace the steering wheel.
I have converted 7 tooth boxes to 2 tooth to keep the splined steering wheel but it requires a little machine work and fabrication.
I have rebuilt a few 7 tooth boxes but never able to get the play equal to that of a 2 tooth.
__________________
I noticed the harder I work the luckier I get!
MAG is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:59 PM.