Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-26-2017, 12:15 PM   #11
Keith True
Senior Member
 
Keith True's Avatar
 
Join Date: May 2010
Location: Epping N.H.
Posts: 3,421
Default Re: Will not start after engine rebuild

You say gas to the carb,now,do you get gas THROUGH the carb?Are the plugs getting wet?If you take the drain plug out of the bottom of the carb does gas run out steadily?For a full minute or two?What we have here,and is very common,are mice nests in the muffler when the car sits around for a month or two.If it can't puff the air out it can't pull the gas in.You cleaned the carb with compressed air,does that mean you blew into the openings while on the car,or did you take it apart and run a wire through the passages before blowing them out?
Keith True is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:01 PM.