Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-06-2017, 10:01 AM   #1
Jason in TX
Senior Member
 
Jason in TX's Avatar
 
Join Date: May 2010
Location: ⓉⒺXⒶⓈ
Posts: 2,047
Default Re: HELP: ready to start again...n/g

Sounds like you have gas and spark. Air is a given.

Take the distributor cap off. When you crank the car, does the rotor spin? I've had the oil pump gear break after a car sat for a while and while all conditions seemed perfect, The distributor rotor wasn't spinning.

This is down at the bottom of the distributor shaft and has a pin in it that can sheer.

__________________
--------------
Drive it like you know how to fix it!
DMAFC / OILERS CC-MC
Jason in TX is offline   Reply With Quote
Old 04-06-2017, 10:11 AM   #2
gypsycandle
Member
 
gypsycandle's Avatar
 
Join Date: Aug 2015
Location: Central Florida
Posts: 76
Default Re: HELP: ready to start again...n/g

thanks didn't check that but i will now...
__________________
I'm quickly becoming a "Specialist" in which I know more and more about less and less until I know everything about Nothing!
gypsycandle is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-06-2017, 10:58 AM   #3
gypsycandle
Member
 
gypsycandle's Avatar
 
Join Date: Aug 2015
Location: Central Florida
Posts: 76
Default Re: HELP: ready to start again...n/g

Yes the rotor turns completely around..
__________________
I'm quickly becoming a "Specialist" in which I know more and more about less and less until I know everything about Nothing!
gypsycandle is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:26 PM.