The Ford Barn

Heard · 10-17-2016, 11:56 AM

Ernie,
You are correct I believe that a stock 33/34 tube might have worked. It would be VERY close and I almost went this way, but I thought since I already had the '35 tt/shaft, I'd modify it. Dick could probably provide some input on this.

And you are correct, it sounds WAY more complicated than it really is. If I can do it, almost anyone on the Barn can do it. After all, I'm just a redneck with a welder. And I ain't very good with it either....

Also, you should know that your old T5 posts are what really started this whole thing so I'm puttin' part of the blame on you!

Heard

10-17-2016, 11:56 AM	#11
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 621	Re: FINALLY…T5 WITH Torque Tube in a ‘35-’40 Ford...The WHOLE STORY! Ernie, You are correct I believe that a stock 33/34 tube might have worked. It would be VERY close and I almost went this way, but I thought since I already had the '35 tt/shaft, I'd modify it. Dick could probably provide some input on this. And you are correct, it sounds WAY more complicated than it really is. If I can do it, almost anyone on the Barn can do it. After all, I'm just a redneck with a welder. And I ain't very good with it either.... Also, you should know that your old T5 posts are what really started this whole thing so I'm puttin' part of the blame on you! Heard __________________ Do I look like I have a plan B?