|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
|
|
09-21-2016, 09:21 AM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,714
|
Re: Looking for a Particular T5 Thread
Finally got a chance to check things out and it looks like I gained a little more than a 1/16th with this new clutch disk and I will shave the adapter just about 3/8". That will give me almost an inch of byte. I can't ask for anything more than that. I will have to shave the stock ford t-out bearing carrier about 3/8" as well.
The shave on the adapter is about where the black line is, even with the slight indentation on the adapter ....
__________________
Run to the LA Roadster Show - 2016 My Run to Bonneville - 2013 My 32 5-Window Build My Run to the LSRU Last edited by TomT/Williamsburg; 09-21-2016 at 09:33 AM. |
|
|
|
«
Previous Thread
|
Next Thread
»
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 01:26 PM.