The Ford Barn

CAPER · 12-28-2010, 04:38 PM

I am restoring a 1931 Tudor.We are now at the problem of needing to put oversize pins in the hinges.Can this be done without removing the hinges from the door and the body? Any advice would be greatly appreciated.

Sonny

Jim Baskin III Pa. · 12-28-2010, 05:50 PM

Sponsored Links (Register now to hide all advertisements)

Sonny,no you do not need to remove the hinges from the body or door.The way I did mine was remove the top pin,drill to proper size and install new pin.Move to the center hinge and repeat the same procedure,same on bottom hinge.Have fun and take your time.

Jim Baskin III 30 tudor abuser.

12-28-2010, 04:38 PM	#1
CAPER Junior Member Join Date: Jul 2010 Location: Cape Breton,Nova Scotia Posts: 11	31 Tudor Door Hinges I am restoring a 1931 Tudor.We are now at the problem of needing to put oversize pins in the hinges.Can this be done without removing the hinges from the door and the body? Any advice would be greatly appreciated. Sonny

12-28-2010, 05:50 PM	#2
Jim Baskin III Pa. Senior Member Join Date: May 2010 Location: Lock Haven Pa. Posts: 252	Re: 31 Tudor Door Hinges Sponsored Links (Register now to hide all advertisements) Sonny,no you do not need to remove the hinges from the body or door.The way I did mine was remove the top pin,drill to proper size and install new pin.Move to the center hinge and repeat the same procedure,same on bottom hinge.Have fun and take your time.Jim Baskin III 30 tudor abuser. Last edited by Jim Baskin III Pa.; 12-28-2010 at 05:53 PM. Reason: because I can