Looking for a Particular T5 Thread

[TomT/Williamsburg]

I have an S10 front retainer on the T5Z (they are interchangeable) so the Camaro or S10 throw out bearing will not be an issue. The stock Ford collar for the stock Ford t-out bearing is a modified unit from Cornhuskers - it all ready has a sleeve to allow it to ride on the S10/Camaro front retainer.

The thread I am looking for has some specs as to how the collar was cut down to use the S10/Camaro t-out bearing and some other info that will make my modification for my application that much easier ....