The Ford Barn

51504bat · 07-28-2016, 09:22 PM

Used the barbie for mine. Froze the flywheel overnight and about 10 minutes on the grill and dropped on no problem.

Bluebell · 07-28-2016, 09:53 PM

How I was taught was to heat it gently with the gas until a wooden match rubbed on the surface charred and slipped easily. No hotter or you will soften the teeth and they wont last long.
The freezer and oven sound good to me. Be organized. I have heard of guys getting it wrong (wrong way up) in the heat of the moment. Then the new gear is scrap.
Have things clean and all burrs removed. You only get one shot at it.

07-28-2016, 09:22 PM	#1
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,413	Re: FLYwheel ring gear Used the barbie for mine. Froze the flywheel overnight and about 10 minutes on the grill and dropped on no problem. __________________ Making the simple complicated for over 30 years.

07-28-2016, 09:53 PM	#2
Bluebell Senior Member Join Date: Nov 2012 Location: Tauranga, New Zealand Posts: 726	Re: FLYwheel ring gear How I was taught was to heat it gently with the gas until a wooden match rubbed on the surface charred and slipped easily. No hotter or you will soften the teeth and they wont last long. The freezer and oven sound good to me. Be organized. I have heard of guys getting it wrong (wrong way up) in the heat of the moment. Then the new gear is scrap. Have things clean and all burrs removed. You only get one shot at it.