The Ford Barn

V8COOPMAN · 06-22-2016, 03:35 PM

Then again, there's Tod Buttermore over on the "Model A" forum that actually does cast and machine his own Cleveland and Model A blocks, etc.....just sayin' that it can be done! Click the link. DD

http://351cleveland.wikifoundry.com/...ttermore+Block

JSeery · 06-22-2016, 04:20 PM

[QUOTE=V8COOPMAN;1312676]Then again, there's Tod Buttermore over on the "Model A" forum that actually does cast and machine his own Cleveland and Model A blocks, etc.....just sayin' that it can be done! Click the link. DD

Don't disagree one bit, you can purchase almost any modern block in aluminum, but they are not flathead v8s!

06-22-2016, 03:35 PM	#1
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,184	Re: Could Edelbrock cast a flathead block Then again, there's Tod Buttermore over on the "Model A" forum that actually does cast and machine his own Cleveland and Model A blocks, etc.....just sayin' that it can be done! Click the link. DD http://351cleveland.wikifoundry.com/...ttermore+Block __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

06-22-2016, 04:20 PM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Could Edelbrock cast a flathead block [QUOTE=V8COOPMAN;1312676]Then again, there's Tod Buttermore over on the "Model A" forum that actually does cast and machine his own Cleveland and Model A blocks, etc.....just sayin' that it can be done! Click the link. DD Don't disagree one bit, you can purchase almost any modern block in aluminum, but they are not flathead v8s!