Chatter Rod Removal

[TonyM]

Here is a Photo of a properly installed "Anti Chatter Rod" from below.

The second photo is a 1937 Ford chatter rod, special flathead square hole bolt, washer and custom made tool.

Third photo shows the two chatter rod holes on top of the frame. If you have the trans cover off, then they are accessible. The left chatter rod hole can be seen just left of the clutch spring. The right chatter rod hole can be seen just above the dog ear of the rear trans mount (it is counter sunk and appears as a dish-shaped hole).

You can access the chatter rod bolts from the top.

If you have something different, then you should post photos so the members can help you.