|
|
03-08-2016, 09:04 PM
|
#1 |
|
Member
Join Date: Sep 2012
Location: Lillooet BC Canada
Posts: 59
|
Re: Hood alignment
Tinbasher, took your advise and checked the frame rails with a straight edge, if the section of frame rail at the rear engine mount is supposed to be straight , then I have one badly bent frame,....is it is out about 5/8" over 3 feet...no wonder the hood doesn't fit !
Dave |
|
|
 |
«
Previous Thread
|
Next Thread
»
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 10:44 PM.