Replacing door wood in a 68B Cabriolet

[BRENT in 10-uh-C]

Originally Posted by 30cabriolet

Any thoughts?

Yep, do it as it was originally done. Assemble the door wood and fit it to the body first. Then disassemble the door sheetmetal and install it onto the wood. You can deviate from this plan if you make your own wood as we sometimes do in this instance but what you are contemplating will likely come back to haunt you.

BTW, --you probably don't want to hear this but wood coachwork become much easier after you have done several cars.

.