Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Light switch rod - at wits end!

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-23-2016, 10:22 PM   #1
1crosscut
Senior Member
 
1crosscut's Avatar
 
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 2,011
Default Re: Light switch rod - at wits end!
What ever you do I would not suggest doing any grinding etc... Something is amiss causing your issues. I suspect as Bob said your having the light switch body in place is causing your problem. Take it off and install the clip 1st.
__________________
Dave / Lincoln Nebraska
1crosscut is offline   Reply With Quote
Old 01-24-2016, 11:18 AM   #2
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 6,039
Default Re: Light switch rod - at wits end!
Quote:
Originally Posted by 1crosscut View Post
What ever you do I would not suggest doing any grinding etc... Something is amiss causing your issues. I suspect as Bob said your having the light switch body in place is causing your problem. Take it off and install the clip 1st.
Excellent advice.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:55 PM.