turn signals

[39 STD]

Here's what I used on my 39, http://www.speedwaymotors.com/Hi-Tec...dule,7079.html Along with a double throw Toggle switch on the bottom lip of the dash. A little pricy but works Great.

[twostickmutt]

Originally Posted by 39 STD

Here's what I used on my 39, http://www.speedwaymotors.com/Hi-Tec...dule,7079.html Along with a double throw Toggle switch on the bottom lip of the dash. A little pricy but works Great.

many thanks

[JSeery]

Originally Posted by 39 STD

Here's what I used on my 39, http://www.speedwaymotors.com/Hi-Tec...dule,7079.html Along with a double throw Toggle switch on the bottom lip of the dash. A little pricy but works Great.

That's the way my 33 5w is wired as well. I didn't care for the column add-on units.

[adileo]

Originally Posted by 39 STD

Here's what I used on my 39, http://www.speedwaymotors.com/Hi-Tec...dule,7079.html Along with a double throw Toggle switch on the bottom lip of the dash. A little pricy but works Great.

Note: that is for 12 volt system. Also aside from cost of Amber bulbs and LED tail lights - I purchased a $27.00 turn signal switch (mounts on col) 2+ years ago and they still work great.

[JSeery]

Originally Posted by adileo

Note: that is for 12 volt system. Also aside from cost of Amber bulbs and LED tail lights - I purchased a $27.00 turn signal switch (mounts on col) 2+ years ago and they still work great.

You are correct, mine is a 12v system. But, as you stated, the third light setups and other add-ons can be purchased in both 12v and 6v. The column mounted switches work fine, I just don't like the looks of them.