Welding in Patch Panels on a Cowl

[Flop]

Some proper cowl panel installaion ... Tig weld if you can . Make sure that patch has the proper contour or you will fight the panel the whole way . Make your cut above the subframe connector so
You have access to hammer the weld . Honestly this is the patch I hate putting in the most .


No need for weld through primer . To expensive to coat a whole back of the panel . Spray the back with whatever primer you have skip the weld area so you don't breathe the stuff all day while welding then spray the whole panel down after you are finished welding and finishing .