|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,955
|
![]()
Zenith carburetor modification question
A friend of mine found this in his collection. Air hole was closed and area opened up around the secondary well. We are wondering why it was modified and how does it work. Thanks Last edited by Joop; 10-03-2015 at 10:08 AM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,397
|
![]()
To air balance if running air cleaner??
Paul |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
![]()
I don't see how it would work since you want the balance tube to end before the choke plate.
Also I don't see any opening for this passageway. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,185
|
![]()
perhaps it is part of a failed experiment, an attempt at balancing ---maybe a groove was cut in a different venturi
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: May 2010
Posts: 61
|
![]()
I have one exactly like that!
I didn`t make much sense to me; I just thought someone was trying something unusual, so I dismissed it and it`s been sitting on the shelf since then. The body is a Zenith 1. The only other difference I noticed is that there is not a weep hole in the bottom of the air intake at the choke. It seems unlikely there would be two of these so far apart if it was just somebody messing around. |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: May 2010
Posts: 61
|
![]() Sponsored Links (Register now to hide all advertisements)
Is someone able to tell JOOP and me what it is about those Zenith Carburetors? |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|