|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Aug 2015
Location: Suffolk County, NY
Posts: 19
|
![]()
can someone post pics of how their exhaust is run from manifolds or headers back on their 41 car. mine is dual exhaust but seems like its everywhere it shouldn't be I know its hard to avoid the wishbone but if I see other I'll know if mine is the way its supposed to be thanks
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Sep 2013
Posts: 1,027
|
![]()
Check with Redd's Headers. They do this for A LIVING.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Junior Member
Join Date: Aug 2015
Location: Suffolk County, NY
Posts: 19
|
![]()
thanks again
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2013
Posts: 149
|
![]()
I don't have pictures, and don't have a smartphone, but I have a 41 rolling chassis handy. The stock routing is from left side under oil pan, joining right side, and down the passenger side of the car. There's also a heat shield on the right side near the front of the engine.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Sep 2013
Posts: 1,027
|
![]()
I think 1980 gold was needing info on a dual exhaust system.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jul 2013
Posts: 149
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Aug 2015
Location: Suffolk County, NY
Posts: 19
|
![]()
thanks guys. I wouldn't even mind if it was a single exhaust running from a y pipe set up. The way I bought it ( about a month ago) the exhaust it routed out from the headers and cuts back in under the wishbones so they pound on the pipes when you hit a bump. Wasn't my idea. thanks for the advice though
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Location: shirley ny
Posts: 992
|
![]()
I have dual exhaust on my 41 ,reds headers and exhaust pipes,drivers side goes though frame where clutch pedal is,no problem
|
![]() |
![]() |
![]() |
#9 |
Junior Member
Join Date: Aug 2015
Location: Suffolk County, NY
Posts: 19
|
![]() |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Sep 2013
Posts: 1,027
|
![]()
Chevy engine?!! Ouch!!. I would give Redds a call. This is a somewhat common setup so they probably have a setup designed. Good Luck
|
![]() |
![]() |
![]() |
#11 |
Junior Member
Join Date: Aug 2015
Location: Suffolk County, NY
Posts: 19
|
![]() |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|