Rear End Gear Ratio for T5 Transmission?

[MikeK]

Originally Posted by 31 Vicky

T5 first gear of 2.95 is about ideal, just slightly taller than stock. . . Dave

Zener424's T5 from an '87 S10 would probably be a NWC case. You can't swap either the 2.95 or 3.35 gearset into it. You would need to swap the case for a WC and modify the S10 tailstock oiler to fit up to the WC case. Then you would have to deal with the different input spline count and length. I believe the NWC/WC shifter forks are a bit different, too?

More of a HAMB question. There's lots there about T5's.