Need a little help with a tilly

		The Ford Barn > General Discussion > Model A (1928-31)
Need a little help with a tilly

Sponsored Links (Register now to hide all advertisements)

Thread Tools

Display Modes

08-04-2015, 12:23 PM

rudvirus

Senior Member

Join Date: Mar 2015

Location: Montgomery, Tx.

Posts: 143

Re: Need a little help with a tilly

Quote:

Originally Posted by Patrick L.

There are only 3 adjustment screws.
The GAV is the main adjustment and this things run best with it turned out from lightly seated at about 1/2 to 3/4 turns. The GAV is also the choke rod.
The idle speed adjustment is the little screw that sets the the throttle plate.
The idle mix adjustment is the little screw in the front the carburetor barrel/venturi and is an air adjustment.

would the idea screw be the top one?

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 02:52 PM.

The Ford Barn