The Ford Barn

MAG · 07-26-2015, 05:55 PM

Is this cup supposed to be here? Yes, it is correct as is.

If the bearing surface on the housing and in the hub are Ok I see no reason to change the bearing. However, I would change it for "feel good" reasons.

john in illinois · 07-26-2015, 07:46 PM

If you can I would advise to stick with the used genuine Ford bearings. Many new bearings are not good quality.

John

07-26-2015, 05:55 PM	#1
MAG Senior Member Join Date: May 2010 Location: Austin, Texas Posts: 926	Re: Front hub, rear bearing questions Is this cup supposed to be here? Yes, it is correct as is. If the bearing surface on the housing and in the hub are Ok I see no reason to change the bearing. However, I would change it for "feel good" reasons. __________________ I noticed the harder I work the luckier I get!

07-26-2015, 07:46 PM	#2
john in illinois Senior Member Join Date: May 2010 Location: Illinois Posts: 2,220	Re: Front hub, rear bearing questions If you can I would advise to stick with the used genuine Ford bearings. Many new bearings are not good quality. John