|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jul 2010
Location: Pittsboro, IN
Posts: 82
|
![]()
I've always liked woody wagons and hucksters. As an engineer, I have access to CAD software so I decided to model one up in 3D for fun. Some of the plans I've seen for these things are pretty poorly done as far a details and today's drawing standards. I'm not done yet but getting close. This is based off of a few that I've seen running around....Yes, I'm making a set of VERY detailed drawings for it.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Oct 2012
Location: Grand Forks, ND
Posts: 195
|
![]()
Very nice. Please keep us updated.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 4,079
|
![]()
Nice work! Now when you get that done, make a drawing of a postal truck body.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2014
Location: Danbury Ct
Posts: 1,254
|
![]()
I did a full set of measured drawings of my original steel skinned 1928 Huckster in the pre computer 1970s. I did it the old school way on a drafting table with drafting tools. Below are a few examples. For all the drawings and many photographs use this link to my dropbox album.
https://www.dropbox.com/sc/yhkylvvki...ozwvEzY9dYQ1Za |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
|
![]()
Make sure there's room for a tall driver, the huckster I had was too tight for a 6'- 3 driver.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Raleigh, NC
Posts: 510
|
![]() Sponsored Links (Register now to hide all advertisements)
Study any original photos and you will see this arch clearly. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
![]()
Although natural wood is beautiful, I believe that most hucksters were painted. Usually green.
|
![]() |
![]() |
![]() |
#8 | |
Member
Join Date: Jul 2010
Location: Pittsboro, IN
Posts: 82
|
![]() Quote:
Nicely Done! Thanks for posting that! I have a lot of appreciation for the guys that drafted by hand! |
|
![]() |
![]() |
![]() |
#9 | |
Senior Member
Join Date: Jul 2014
Location: Danbury Ct
Posts: 1,254
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Apr 2011
Posts: 319
|
![]()
PLEASE keep us informed!!!!!
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|