welded crankshafts

[BRENT in 10-uh-C]

Originally Posted by gwhite

SCAT makes a counterbalanced Model A crank with the correct 1.625" main journals; http://www.scatcrankshafts.com/produ...e/crankshafts/

Originally Posted by hardtimes

You are correct regarding the scat A crank.
1929 did not mention whether he wanted an A or B crank. He wanted counterweights and my mind went right to model B/C cranks with integral counterweights, because that's what I use. I figured that maybe 1929 did not know of this counterweighted crank. That said, if you want a scat to install in a B block, then I stand on what I wrote regarding that crank having B size mains and A size rod throws.

You both likely already know this but it might be worth saying for those who don't, ....SCAT will machine a crankshaft to whatever specs you choose to order. The additional cost(s) are only proportional to the additional time it takes to make the changes.