The Ford Barn

ursus · 03-13-2015, 12:43 AM

Are you referring to the length of angle steel that functions as a "backer" and is visible from underneath? I have one in my late 1931 coupe.

Steve Plucker · 03-13-2015, 03:16 AM

Quote:

Originally Posted by ursus

Are you referring to the length of angle steel that functions as a "backer" and is visible from underneath? I have one in my late 1931 coupe.

No...It is a reinforcing strap about 1/2”W x 3"L with a hole in it and is spot welded to the sheet metal trough edge which accepts the Special Bolt to fix the Deck Door (Trunk Lid) Support Bracket on the left side of the trough only and is in plain sight if it is there.

Pluck

Marco Tahtaras · 03-13-2015, 09:28 AM

Not a very good pic, but it's there.

03-13-2015, 12:43 AM	#1
ursus Senior Member Join Date: May 2010 Location: Oregon Posts: 1,462	Re: Deck Door Drain Trough... Are you referring to the length of angle steel that functions as a "backer" and is visible from underneath? I have one in my late 1931 coupe.

03-13-2015, 09:28 AM	#3
Marco Tahtaras Senior Member Join Date: May 2010 Posts: 3,099	Re: Deck Door Drain Trough... Not a very good pic, but it's there. __________________ http://www.abarnyard.com/