Shifting tower/arm on my '42 PU-New info - The Ford Barn

		The Ford Barn > General Discussion > Early V8 (1932-53)
Shifting tower/arm on my '42 PU-New info

Sponsored Links (Register now to hide all advertisements)

Prev

Previous Post

Next Post

Next

03-12-2015, 10:01 AM	#6
svm99 Senior Member Join Date: May 2010 Location: Garlic Country of CA Posts: 565	Re: Shifting tower/arm on my '42 PU Sponsored Links (Register now to hide all advertisements) I'd say the 1/4" pin which aligns the shifter is worn and is allowing the shifter to "rotate" in the top. Carefully extract the pin, cut the shank from a 1/4" drill and try again. This is a quick fix but may get you back on the road. I would think the ball tip has less to do with this than the pin does. Good Luck, Paul J.

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 05:37 AM.