The Ford Barn

Farmer j · 03-04-2015, 04:49 PM

That row of nuts is what holds the hinge to the windshield frame. They may not be right, but that's what's there. Is that channel supposed to have a seal there? Or does something else cover the nuts? Possibly the nuts were supposed to be Dnuts and not protrude into the channel, then a strip of some sort of seal goes in the channel. I would assume there had to be a seal of sorts there for the top header to rest against. A picture of this area would answer this very easily. Hope someone can help.

03-04-2015, 04:49 PM	#1
Farmer j Junior Member Join Date: Aug 2014 Posts: 25	Re: 68C info That row of nuts is what holds the hinge to the windshield frame. They may not be right, but that's what's there. Is that channel supposed to have a seal there? Or does something else cover the nuts? Possibly the nuts were supposed to be Dnuts and not protrude into the channel, then a strip of some sort of seal goes in the channel. I would assume there had to be a seal of sorts there for the top header to rest against. A picture of this area would answer this very easily. Hope someone can help.